The inflatable boats need constant care. The only way you can enjoy your pneumatic boat much longer. Below you will find some practical tips for caring for your pneumatic. For more specific information, check out Endera. AIR pressure it is recommended that you inflate your pneumatic according to the specifications of the air pressure recommended by the manufacturer. Your pneumatic boat prevents sobrehinchar since this can cause cracks in the same PVC material. If your inflatable boat is long exposed to the Sun, it is necessary that controls the pressure of the air of the same, since excessive heat makes the air that is inside your pneumatic expendir and this may cause to the largadanos in your boat. CLEANING every once you’ve finished using your pneumatic boat it is recommended that cleaning it with water and you put it with a non-abrasive clean cloth. There are also special products for the cleaning of your pneumatic PVC, which can help protect against ultraviolet rays, and possible stains or chemical substances that may damage it.
TRANSPORT when you want to transport your pneumatic, ideally do so when it is deflated. Your air should be protected with a canvas or saved in their respective bag for transport. It must be pay attention does not carry your pneumatic along with sharps. DAMAGE if there is a crack or a hole in your air is recommended to follow the instructions of the manufacturer for repair. Aconsable is always have a repair kit on hand that will allow you to repair it in a fast and easy way. If the damage is serious, it is best to immediately contact your dealer or the manufacturer of your pneumatic.
STORAGE if you decide to store your air for a long time, deflate it completely. Before storage make sure that your air is clean and dry. Protect it from the Sun and store it in a place where you can protect against dust and any abrasive item. Following these tips will keep the quality of your pneumatic boat and you can enjoy it for much longer.